Support forum

Advanced Search

— Forum Scope —




— Match —





— Forum Options —





Minimum search word length is 3 characters - maximum search word length is 84 characters

sp_TopicIcon
connect diafaan to yeastar tg800
sp_NewPost Add Reply sp_NewTopic Add Topic
January 30, 2017
11:51 am
trasser
Guest
Guests

Hello!
Everything worked. Thank you so much.

January 30, 2017
11:02 am
Henk Helmantel
Admin
Forum Posts: 667
Member Since:
May 28, 2013
sp_UserOfflineSmall Offline

The error in the log indicates that the Yeastar TG800 uses an non-standard header name in the HTTP headers. There is a way to disable these HTTP server errors in Diafaan SMS Server in the program settings of the Diafaan SMS Server service application for all HTTP requests.

The program settings for the Diafaan SMS Server service application are located in the file:
C:\Program Files\Diafaan SMS Server\DiafaanMessageServer.exe.config
or
C:\Program Files (x86)\Diafaan SMS Server\DiafaanMessageServer.exe.config

To disable the HTTP header errors before the line:

</configuration>

you have to insert the following lines:

<system.net>
<settings>
<httpWebRequest useUnsafeHeaderParsing="true" />
</settings>
</system.net>

Regards, Henk

January 27, 2017
1:00 pm
trasser
Guest
Guests

Hello!

Sending screen and log files. With this setting, SMS sending occurs. BUT there is an error protocol and the server attempts to send a message 3 times. As a result SMS comes 3. The amount depends on the settings. How to disable GET protocol errors in Diafaan?

LOG FILES [Link removed]

January 26, 2017
3:26 pm
Henk Helmantel
Admin
Forum Posts: 667
Member Since:
May 28, 2013
sp_UserOfflineSmall Offline

Hello Trasser,

We have never tested the Yeastar TG800 but if the information in the link is correct then you should be able to use an HTTP Gateway in Diafaan SMS Server (basic- or full edition) to send SMS messages.

You have to use a 'Generic HTTP gateway' and set the 'Web page:' property to something like 'http://192.168.0.x/cgi/WebCGI'. The 'HTTP query:' property should be set to something like: '1500101=account=user&password=pass&port=0&destination=[to]&content=[message-text]'.

The query format of the Yeastar HTTP API is a bit strange, the '1500101=account=user' part of the query is not standard. But this is what the documentation says.

Regards, Henk

January 26, 2017
12:08 pm
trasser
Guest
Guests

Hi
Here is a link to Yeastar
https://support.yeastar.com/hc/en-us/articles/217393078-HTTP-Interface-for-SMS

I tried, does not work/ Advise how to be?

July 28, 2016
10:03 am
Henk Helmantel
Admin
Forum Posts: 667
Member Since:
May 28, 2013
sp_UserOfflineSmall Offline

Hello Diego,

Diafaan SMS Server only supports GSM modems that conform to the 3GPP TS 07.05/3GPP TS 07.07 AT command standard or gateway devices that have a built-in SMPP server. As far as I can determine from the specifications, the Yeastar TG800 does not have support for these two standards.

The documentation mentions an API for SMS but I could not find the specifications for this API. If it is an HTTP API it might be possible to use the HTTP Gateway in the basic- or full edition of Diafaan SMS Server to send SMS message with the Yeastar TG800 but only for sending basic SMS messages.

Regards, Henk

July 28, 2016
5:10 am
Diego
Guest
Guests

Hi,

I have a yeastar tg800 modem but I can´t configurate a smpp server, I dont sure if the correct, please can you tell me the steps to this installation.

Best regards

Diego

Forum Timezone: Europe/Amsterdam

Most Users Ever Online: 494

Currently Online:
6 Guest(s)

Currently Browsing this Page:
1 Guest(s)

Top Posters:

Member Stats:

Guest Posters: 415

Members: 0

Moderators: 0

Admins: 1

Forum Stats:

Groups: 2

Forums: 3

Topics: 610

Posts: 2091

Newest Members:

, Henk Helmantel

Administrators: Henk Helmantel: 667